Preventive controls for food allergens, gluten and added sulphites
Although the Safe Food for Canadians Regulations (SFCR) came into force on January 15, 2019, certain requirements are being phased in over the following 12 to 30 months. For more information, refer to the SFCR timelines.
Is a protein found in certain grains such as barley, oats, rye, triticale, and wheat. It can trigger an autoimmune reaction in individuals with Celiac disease.
Is the inadvertent, unintentional transfer of residues of an allergenic food into another food that is not intended to contain the allergen.
Is a reaction of the body's immune system to specific proteins in a food.
Is a food sensitivity that does not involve the immune system. A food intolerance is usually caused by an inability to digest or absorb certain foods, or components of a food.
Is an adverse reaction to a food as a result of a food allergy, food intolerance or chemical sensitivity.
Certain foods, ingredients or their components can cause adverse or life threatening reactions in individuals with food sensitivities. Food allergens, gluten and added sulphites are considered chemical hazards that food operators should consider during their hazard analysis and when establishing control measures.
Undeclared allergens, gluten and added sulphites are a leading cause of food recalls. The presence of allergens, gluten and added sulphites cannot be reduced or eliminated by a thermal treatment or post-processing step. Preventive control measures are necessary throughout the preparation steps to prevent them from coming into contact with a food in which they are not an intended ingredient. Proper declaration of ingredients on the food label is necessary to inform consumers that may be sensitive to a food allergen, gluten or added sulphites.
In Canada, the common food allergies and related disorders are:
- tree nuts (almonds,Brazil nuts, cashews, hazelnuts, macadamia nuts, pecans, pine nuts, pistachio nuts and walnuts)
- crustaceans and molluscs
- wheat and triticale
The Canadian Food Inspection Agency (CFIA) created this document as a guideline to help food businesses comply with the Safe Food for Canadians Regulations.
You may use other guidance developed by provincial governments, industry associations, international partners or academic bodies as long as they can achieve the outcomes identified in the regulations. Always ensure that the guidance you choose is relevant for your particular business, product or products, and market requirements.
The document outlines preventive controls a food operator should take to:
- prevent ingredients and food that are allergens or contain allergens, gluten or added sulphites, from contaminating a food in which they are not an intended ingredient
- ensure that ingredients that are allergens or contain allergens, gluten or added sulphites, are properly declared in the list of ingredients on the food label
Refer to the Tell me more! section for other useful references related to allergens, gluten and added sulphites.
What's not included
While this document provides information on control measures to prevent the cross-contact of a food with allergens and gluten that should not be present, it is not exhaustive – the preventive control measures needed will depend on the size and complexity of the food operation and be unique for each business.
The document does not discuss food labelling requirements. Labelling requirements can be found in the Labelling tool.
Roles and responsibilities
Food businesses are responsible for complying with the law. They demonstrate compliance by ensuring that the commodities and processes for which they are responsible meet regulatory requirements. If a written preventive control plan (PCP) is required, the food business develops a PCP with supporting documents, monitors and maintains evidence of its implementation, and verifies that all control measures are effective.
The CFIA verifies the compliance of a food business by conducting activities that include inspection, and surveillance. When non-compliance is identified, the CFIA takes appropriate compliance and enforcement actions.
Preventive controls for allergens, gluten and added sulphites
Allergens, gluten and added sulphites can end up in a food, in which it is not an intended ingredient, as a result of:
- cross-contact points along the processing lines
- carry over from an ingredient used
- dust or aerosals that get carried throughout the processing area
- re-using an ingredient such as cooking oil
- a change, substitution or addition of an ingredient or the supplier of ingredients
- using the wrong ingredient
- using unknown ingredients
- ineffective cleaning
- food proteins can be difficult to remove from food contact surfaces especially if the protein has been heated/denatured
- re-using cleaning solutions
Establish an allergen prevention team
It is a good practice to have an allergen prevention team. This helps ensure proper identification of allergens and sources of gluten and added sulphites, how and where they can come into contact with a food, and the application of effective measures to prevent cross-contact.
For smaller food businesses, food allergen preventive controls can be effectively led by one person. Larger food businesses may require a team. The person or team could include staff responsible for the hazard analysis and preventive control plan, quality assurance, purchasing, manufacturing, engineering and food development.
Identify sources of food allergens, gluten and added sulphites
During the hazard analysis, it is important to identify:
- all the ingredients or food received that are allergens or contain a food allergen, gluten or added sulphites
- prepare a list of all ingredients, raw materials and foods that are allergens or may contain an allergen, gluten or added sulphites
- indicate the control measures applied to prevent them from coming into contact with a food in which they are not an intended ingredient
- all the processing steps where a food allergen, gluten or added sulphites can come into contact with a food in which they are not an intended ingredient
- pay particular attention to the receiving, storing, mixing, blending/formulation and labelling steps
Implement control measures
Food related control measures
You should provide written specifications to each supplier of ingredients you use to prepare a food. This helps ensure that the suppliers have controls to:
- prevent allergens, gluten or added sulphites from coming into contact with an ingredient, in which they should not be present, that they supply to you
- identify allergens, gluten and added sulphites when present in the ingredient
You should verify the ingredients and their labels upon their receipt at your establishment to ensure they meet your specifications. The document Supplier food safety assurance program provides additional information on measures you can take to ensure the products you receive meet your specifications. Annex A provides a checklist you can use with your suppliers as part of your controls for allergen, gluten and added sulphites.
The most current formula or recipe of each food should be available in writing for production staff to follow. This helps ensure that multi-ingredient foods are produced in accordance to their formula and prevents the mistaken addition of unintended ingredients that are allergens or could contain food allergens, gluten or added sulphites.
- Prepare a written formula or recipe for each food
- identify each ingredient and component
- define steps to be followed when modifications to existing formulations are made
- establish procedures to dispose of obsolete formulas
- if necessary, the product formulation can be adjusted to avoid using ingredients that are allergens or may contain allergens, gluten or added sulphites
Process related control measures
Areas where cross-contact can occur
Map out the flow of ingredients in the establishment, through the processing steps and by air movement, in order to identify areas where cross-contact with a food allergen, gluten or added sulphites can occur.
- Create a flow diagram mapping out each production line, ingredient, food and conveyance
- identify each area where cross-contact is possible
- identify equipment that is used for both allergenic and non-allergenic foods
Note: Multi-use equipment presents a greater potential for cross-contact between food allergens, gluten and sulphites, with a food.
- Outline the traffic pattern flow for employees and visitors to prevent them from being a source of contamination
When possible, use dedicated production lines. If this is not feasible, the preparation of foods containing allergens, gluten or added sulphites should be scheduled so that the equipment can be thoroughly cleaned prior to the preparation of a food that should not contain them.
Re-use of ingredients/reworked food
When a batch of food containing an allergen, gluten or added sulphites, or an ingredient such as frying oil is used to prepare a food containing an allergen, gluten or added sulphites, the food or ingredient should only be reworked or re-used in the preparation of the same food product.
- Specify when a food can be reworked, an ingredient can be re-used and in what food they can be used
Storage and handling
Ingredients and food that contain an allergen, gluten or added sulphites should be stored and handled in a manner that will prevent them from coming into contact with other ingredients and food that do not contain them. The following practices can help prevent cross-contact.
- having a dedicated storage area for ingredients and foods with allergen, gluten or added sulphites
- storing ingredients and food with allergen, gluten or added sulphites on shelves below other ingredients and food and keeping them away from packaging materials and labels. This helps prevent cross-contact in the event spillage occurs
- clearly identifying ingredients and food with allergen, gluten or added sulphites using signs or color codes
- keeping ingredients, food, packaging materials and labels sealed until their use
Conveyances used to transport ingredients, food, packaging and labels could be a source of cross-contact with allergens, gluten or sulphites.
- they should be maintained and cleaned to remove residues of an allergen, gluten and sulphites they may have come into contact with
- ingredients and food that contain an allergen, gluten or added sulphites should be in sealed packages during transportation. If they are not in closed packages, they should be transported separately from other ingredients and food
Packaging and labelling
Having undeclared allergens, gluten or added sulphites in a food is a serious risk for individuals that are sensitive to them. You should have control measures to ensure allergens, gluten and added sulphites are properly declared on your food label.
- Refer to the List of ingredients and allergens requirements for more information
The following are measures you can take to ensure that the proper label is applied to your food:
- include a break in production when there`s a change in the type of food prepared
- use marked containers to ensure different foods are not intermixed prior to labelling
- verify labels prior to their application to ensure the right label is applied to the right food
- verify that packaging and labelling for the inner and outer packaging are for the same food
- include a label review and update whenever there is a substitution of ingredients and a change in formulation
- dispose of incorrect or outdated labels
Establishment related control measures
Equipment is designed, installed and maintained in a manner that prevents cross- contact of allergens, gluten or sulphites with food in which they are not an intended ingredient.
When setting up or renovating a processing line:
- identify the lines used to prepare food that are allergenic or contain gluten
- consider the proximity of pieces of equipment to each other and the potential for cross-contact of the food prepared
- avoid line cross-over
- allow sufficient space to perform cleaning, sanitation and inspection
- reduce the creation and spread of dust
- use dedicated lines for foods that are allergenic or contain gluten
- isolate the ingredient addition steps and add ingredients that are allergenic, or contain gluten, near the end of the process (when possible). This helps minimize the amount of equipment that comes into contact with these ingredients
- dedicate hard to clean equipment to the preparation of foods that contain allergens, gluten or added sulphites and
- separate or dedicate, color code, or use another means to identify tools and equipment used for preparing and handling ingredients or foods that are allergenic or contain gluten
Effective cleaning is one of the most important strategies for preventing cross-contact of a food with an ingredient that can cause food sensitivities. Validation of cleaning methods is important for ensuring its effectiveness.
Factors to consider that can affect the cleanup of allergens, gluten or added sulphites:
- its form: paste, particulate, powder, liquid
- its solubility – water or lipid-based
- its concentration – high or low
- the application of heat during processing
- the type of food contact surface
- the length of processing run and the biofilm/build-up of food material
- the type of cleaning method
A sanitation program should address the:
- cleaning up of spills as they occur and the cleaning of all equipment and utensils once the manufacturing cycle is complete
- cleaning of equipment, food contact surfaces and other areas during operations (where dedicated lines, equipment or areas for preparing foods that are allergenic, or contain gluten, are not available)
- disassembly and manual cleaning of equipment to remove trace amounts of allergens, gluten and sulphites
Wet cleaning methods
Wet cleaning is recommended to eliminate doughy or sticky residues that can contain allergens, gluten or sulphites.
Wet cleaning methods:
- should only be used in areas and with equipment designed to accommodate water
- some equipment may need to be disassembled and hand cleaned
- should make use of detergents and sanitizers
- rinsing with water alone, is insufficient
- chlorinated alkaline detergents are the most effective for removing proteins. Alkaline/Caustics with hydrogen peroxide and enzymes are also effective
- can be automated Clean-in-place (CIP), semi-automated Cleaning out of place (COP), or manual
- when using a CIP system, processing equipment should be examined for evidence of pitting or rough welds that cannot be adequately cleaned and may trap residues
Dry cleaning (cleaning without water) is mostly used in areas and with equipment not designed to accommodate water (in the preparation of low water activity foods). It is not recommended when the food being prepared can result in wet, sticky, or gummy residues.
Dry cleaning methods include:
- Compressed air
- its use should be controlled to prevent airborne particles that could be a source of cross-contact
- Grit/CO2 blasting
- Pre-moistened (alcohol) wipes
- Dry steam
- Purge/push-through with ingredients or some of the food prepared next
Personnel Hygiene and Training
In addition to the measures you have in place for personnel hygiene to prevent contamination of the food you prepare, you should also consider the risks of cross-contact of a food with residues of allergens, gluten or added sulphites that can cling to clothing worn by the personnel.
- Disposable plastic aprons, gloves, or other impermeable clothing should be used by personnel.
You should provide training to your personnel on allergens, gluten and sulphites to ensure that they understand and are aware of:
- the priority allergens and gluten sensitivities
- sources of allergens, gluten and added sulphites and the areas of cross-contact with the foods you prepare
- the control measures used to prevent cross contact and remove residues of allergens, gluten and added sulphites
- the importance of proper labelling
Verifying the effectiveness of the control measures
The effectiveness of the control measures applied can be verified by determining whether residues of ingredients that can cause food sensitivities remain in the processing environment - or end up in foods that should not contain them.
The most frequently used methods to detect for the presence of food allergens and gluten can be classified into protein-based and DNA-based methods.
Note: The analytical methods used should be capable of detecting the ingredient under consideration in the low mg/kg range.
- Protein-based methods: Enzyme-linked immunosorbent assays (ELISAs)
- Detect the allergenic protein or a marker protein using an antibody such as:
- well and lateral flow devices (LFDs)/dipsticks
- sandwich and competitive
- multiplex LFDs
- Can be used on:
- push through materials after cleaning (for example, salt, sugar or the next product prepared)
- the first product prepared after cleaning (prepared off line or finished products)
- Clean In Place (CIP) rinse-water
- food-contact surfaces after cleaning
- Detect the allergenic protein or a marker protein using an antibody such as:
- DNA-based methods: Polymerase chain reaction (PCR)
- Targets specific DNA sequences
- offers the best option for the sensitive detection of food allergens
- is negatively affected by thermal treatments (with the effect being most pronounced under acidic conditions)
- Targets specific DNA sequences
- Non-specific methods
- Adenosine Triphosphate (ATP) Swabs: measures the ATP residues present from biological sources
- ATP residues may not come from an allergen.
- Total protein measures the protein residues present (the protein measured may not come from an allergen)
- Adenosine Triphosphate (ATP) Swabs: measures the ATP residues present from biological sources
Tell me more! Further reading
The following references contain information that helps explain food safety controls, demonstrates how to develop them, and provides examples. The CFIA is not responsible for the content of documents that are created by other government agencies or international sources.
- Preventing cross-contamination
- List of ingredients and allergens
- Food allergen precautionary statements
- Reference database for hazard identification
- Food allergen labelling
- Codex Alimentarius Commission, General standards for the labelling of prepackaged foods, Codex Standard 146-1985, 2009
- Health Canada, Common food allergens
- Health Canada, Compendium of food allergen methodologies
- Health Canada, Food allergen labelling
- Health Canada, The use of food allergen precautionary statements on prepackaged foods
The following is an example checklist that can be used to obtain information from your suppliers. It includes the priority allergens which are known to cause life threatening reactions in individuals that are sensitive to them.
Having your suppliers complete such a checklist, provides you with the necessary information to use during your hazard analysis - and can trigger the need to revise a label and the addition of a precautionary statement on the label.
Food suppliers allergen, gluten and added sulphites checklist
Product name: UPC#
Fill out the following table for each food or ingredient product supplied. Fill each cell with a Yes or No. Where applicable include the name of the ingredient.
- Column I - indicate the priority allergens or gluten that may be found in the food or ingredient, from addition or cross-contact.
- Column II - indicate the priority allergens or gluten present in other food or ingredients that are prepared on the same equipment but at a different time.
- Column III - indicate whether any priority allergens or gluten are present in your establishment.
|Priority Allergens and Gluten||Column I |
Present in the ingredient or food
|Column II |
Present in other ingredients or foods prepared on the same line
Present in the establishment
|Eggs or its derivatives:
|Fish or its derivatives:
|Milk or its derivatives:
|Mustard or Mustard Seeds:|
|Peanut or its derivatives:
|Sesame or its derivatives:
|Soy or its derivatives:
|Tree Nuts - almonds, Brazil nuts, cashews, hazelnuts(filberts), macadamia nuts,pecans, pine nuts (pinyon, pinon), pistachios and walnuts
or their derivatives:
|Wheat or its derivatives:
|Others (as considered necessary)|
Do you have procedures to avoid cross-contact of the food allergens, gluten, or added sulphites noted in columns II and III, with a food in which they are not an ingredient? Yes No
Attach a label to this form for each food.
Note: If, for any reason, there are changes made to this product, you are responsible for updating your records, including labels and specifications, and notifying the person responsible for purchases.
- Date modified: